Attention should be paid to the use of stainless steel chain in the process of use, we use stainless steel chain to transfer items, inevitably, sometimes will transfer corrosive substances, how to deal with the ability to minimize the corrosion of corrosive items to the chain? If we do not handle it properly, the service life of the chain will be greatly reduced. When the chain is transporting corrosive substances, it is inevitable to contact with corrosive substances. Rust on the rust spots and parts will affect the flexibility of the chain hinge and roller reversal. Stress corrosion and grain corrosion may also occur.
In the case that the conveyor contains corrosive substances, the chain used must pay attention to the selection of raw materials for the chain parts; Whether the chains of parts made of martensite stainless steel will rust also depends on the working conditions. The corrosion resistance of stainless steel chain is stronger than the corrosion resistance of the general chain, so please give priority to choose the quality of reliable manufacturers of stainless steel chain.
In addition, please pay attention to the timely cleaning after using the chain to transport corrosive substances, because if not cleaned in time, the chain and the corrosive substances adhering to its surface will leak out in the air, and there will be a more violent oxidation reaction and a series of corrosive chemical reactions. At the same time, it is best to use the temperature of about 35 degrees of warm water when cleaning, avoid by all means do not use any detergent and disinfectant containing chemical substances when cleaning. Because the disinfectant contains chemical substances that can react with the stainless steel, it will affect the service life of the stainless steel chain.