Because of the stainless steel chain shows many excellent performance, so many professional areas in the demand for stainless steel chain, such as goods in the lifting and transfer operations, stainless steel chain also ACTS as a not alternative effect. It is understood that the production of stainless steel chain in the process will be used in the welding process, and mainly to light welding.
The so-called bright butt welding, is the use of butt welding machine to make the two metal touch, through the low voltage of the strong current, ratio and metal is heated to a certain temperature soft after the axial pressure forging, and then constitute the butt welding joint. Light surfacing welding of stainless steel chain can be divided into three different types, respectively are light - preheating light welding, preheating light butt welding and continuous light butt welding, they have different operating procedures and characteristics, made of stainless steel chain will be slightly different.
If what stainless steel chain chooses is bright light - preheat bright light is welded, so before welding the demand adds a bright light process, the intention is to make not flat steel bar end face is burnt flat, make preheat even. In this way when the actual implementation of the welding time can be connected to the light, and then with the preheating light welding.
However, the preheating flash butt welding looks similar to it, but in essence it is still different. The preheating flash butt welding requirement is to add a preheating process before the continuous flash welding of the stainless steel chain, so as to expand the welding heat affected area. When the steel bar reaches the preheating temperature, it enters the bright light stage and is formed by the top forging after attachment.
When the user is connected to the light welding to the stainless steel chain welding time, must first close a circuit, so that the two steel bar end surface subtle touch. At the same time, metal particles are ejected from the void of the end face. Then slowly move the steel bar so that the two sides still maintain a subtle touch, forming a joint light.
In the stainless steel chain flash welding time, when the light to the predetermined length, so that the steel bar end heating to near the melting point, on the pressure must be nimble for the top forging. Generally is the first live top forging, and then electrical top forging to a certain length, so that the stainless steel chain welding joint to successfully end.
